Gardiner Micro Jet Rinse Bar

The Gardiner Micro Jet Rinse Bar can help you get better coverage while rinsing!

Features:

• Rinse bar has 16 micro jets (10 inch) or 32 micro jets (14 inch) to provide precise but gentle rinsing
• Bracket fits between the brush and brush socket on any 10 or 14 inch Gardiner brush (excluding the Sill or Supreme brushes)
• Lightweight at 41g (10 inch) or 48g (14 inch)
• Provides full-coverage over-bristle micro jet rinsing
• Flow rate is half that of the standard micro-jet rinse-bar and about equivalent to standard pencil or Fanjets - recommended 1.5 - 2lpm Jet angle is 3° higher than standard rinsebar to allow for lower flow rates
• Height of jets can be adjusted
• Uses John Guest connections on unit
• Uses standard brush 3-way connector and jet hose
• Can be used with internal brush jets as well with the 5-way connector
• Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws; if used on Xtreme will need 16mm)

Please note: The Gardiner Micro Jet Rinse Bar does not come with brush, gooseneck, or waterpole.

Available in 10 or 14 inch.