Gardiner Micro Jet Rinse Bar
The Gardiner Micro Jet Rinse Bar can help you get better coverage while rinsing!
- Rinse bar has 16 micro jets (10 inch) or 32 micro jets (14 inch) to provide precise but gentle rinsing
- Bracket fits between the brush and brush socket on any 10 or 14 inch Gardiner brush (excluding the Sill or Supreme brushes)
- Lightweight at 41g (10 inch) or 48g (14 inch)
- Provides full-coverage over-bristle micro jet rinsing
- Flow rate is half that of the standard micro-jet rinse-bar and about equivalent to standard pencil or Fanjets - recommended 1.5 - 2lpm Jet angle is 3° higher than standard rinsebar to allow for lower flow rates
- Height of jets can be adjusted
- Uses John Guest connections on unit
- Uses standard brush 3-way connector and jet hose
- Can be used with internal brush jets as well with the 5-way connector
- Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws; if used on Xtreme will need 16mm)
Please note: The Gardiner Micro Jet Rinse Bar does not come with brush, gooseneck, or waterpole.
Available in 10 or 14 inch.