Petzl ASAP LOCK Rope Grab

(0) No Reviews yet
$289.00
SKU: H-RG150

Estimated availability April 2023.

Details

A fall arrester with a locking function

The Petzl ASAP LOCK mobile fall arrester is designed to facilitate handling during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the fall arrester locks on the rope and stops the user. The integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. The connection arm makes the system drop-resistant when passing intermediate anchors.

Features

  • Constant fall protection:
    • Arrests falls, slides, and uncontrolled descents.
    • Works on vertical or angled rope.
    • Locks on the rope even if grabbed during the fall.
  • Integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. In the event of a strong wind, this function also prevents the rope from being blown upward.
  • Simple to use, and effective:
    • Moves up or down the rope, without any manual operation.
    • Easy to install and remove at any point on the rope.
    • Connection arm makes the system drop-resistant when passing intermediate anchors.
    • Used with an energy absorber to work at a distance from the rope, either the Petzl ASAP’SORBER or ASAP’SORBER AXESS. The latter can be used for loads of up to 551 pounds (250 kg) in two-person rescue situations.
  • Certifications:
    • CE EN 12841 type A when used with a Petzl ASAP’SORBER or ASAP’SORBER AXESS energy absorber, and a 10-13 mm EN 1891 type A rope
    • CE EN 353-2 when used with a Petzl ASAP’SORBER or ASAP’SORBER AXESS energy absorber and a Petzl AXIS 11 mm rope with sewn termination
    • UKCA
    • EAC when used with a Petzl ASAP’SORBER or ASAP’SORBER AXESS energy absorber, and a 3/8 to 1/2 inch (10 to 13 mm) EN 1891 type A rope
    • ANSI Z359.15 when used with a Petzl ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Petzl Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a Petzl CAPTIV positioning bar, and a Petzl RAY 11 mm static rope with sewn termination

The Petzl ASAP LOCK should only be used with a Petzl ASAP’SORBER or ASAP’SORBER AXESS energy absorber to work at a distance from the rope.

This is the shock absorber ONLY. For the Petzl ASAP’SORBER, see the related items below.

Ratings & Reviews

No reviews available

Be the first to Write a Review